Small Leather Pulls

Small Leather Pulls Specifications

Most of Rockwood's products are available in a wide variety of architectural finishes. The photographs generally show only one finish for aesthetic reasons, but all traditional architectural finishes are available. The base metals for Small Leather Pulls are stainless steel or brass.

Upholstery Leather

Upholstery leather is available in two standard colors or from a universe of custom leather. Rockwood uses 3 to 4 ounce chrome tanned leather, tightly wrapped and neatly sewn along the back. Detail end stitching compliments this glove soft leather which is suitable for interior applications.

Finest English Bridle Leather

Rockwood uses Bridle leather produced by J & E Sedgwick & Co., Ltd., Walsall, England. Founded in 1900, Sedgwick is renowned for its high quality leather products. Their 8-ounce hand-colored vegetable tanned English Bridle leather enjoys the reputation of being the finest in the world; you can be assured of a beautiful, durable leather door pull.

Leather Maintenance

Upholstery Leather has a breathable protective finish that is best cleaned by wiping with a cool damp cloth. For tougher soiling, use a pH balanced soap on a cloth and rinse. Always use cool water. Repeat if necessary. Do not use wax, mink oil, saddle soap or polishes on upholstery leather. Leather Maintenance Kits are available from the factory.

English Bridle Leather leaves the Rockwood factory with a coat of Sedgwick Leathercare Product, a mixture of natural oils, fats and beeswax. Clean the leather as necessary with a damp cloth and allow to dry. Apply a light coat of leather care product, allow to dry and buff with a soft cloth. Additional Sedgwick Leathercare Product is available from the factory.

We recommend periodic application of a good leather conditioner such as Mermac Mink Oil. Frequency of maintenance depends on exposure to weather and wear. Mermac will darken the leather about the same as a drop of water. Test a small spot prior to using to verify the slight color change that naturally occurs is appealing. Contact Penner for additional product information.

Note:

• Maximum leather length is 72"
• Leather thickness is approximately 1/8"

General Warranty: Rockwood Manufacturing Company warrants that its products when properly delivered, installed and maintained, under normal use and service conditions, will be free from defects in material and workmanship for a period of one year from the date of delivery. Because of variations in atmospheric and climatic conditions, Rockwood does not warrant that its products will maintain a “like new” appearance for any length of time, so this warranty does not extend to the appearance of Rockwood’s products. Rockwood shall have no responsibility other than the repair or replacement of defective products.