Shower Seats

Frost Product Specifications

Full Wall Mounted, Retractable Shower Seat

• Code 972: Stainless steel construction; white phenolic seat.
• Specifications: Compact flip up shower seat retracts out of way when not in use. One piece phenolic top, 5/16” (8mm) thick. Unit frame is fabricated from 1” O.D. 18 gauge brushed finish type 304 stainless steel. Welded construction, features full 360 degree welds on all joints. Support and flanges are also stainless steel with brushed finish.
• Installation: Mounting hole locations are for reference when providing in wall support. Mounting screws provided.

Full Wall Mounted, Retractable, Barrier Free Shower Seat

• Code 975: Stainless steel construction; white phenolic seat; barrier free design.
• Specifications: When ordering specify right or left handed (right shown). Compact flip up shower seat retracts out of way when not in use. One piece phenolic top, 5/16” (8mm) thick. Unit frame is fabricated from 1” O.D. 18 gauge brushed finish type 304 stainless steel. Welded construction, features full 360 degree welds on all joints. Support and flanges are also stainless steel with brushed finish.
• Installation: Mounting hole locations are for reference when providing in wall support. Mounting screws provided.
• Note: When ordering, specify right or left handed.

Full Wall Mounted, Hinged, Corner Shower Seat

• Code 976: Stainless steel corner shower seat provides maximum space utilization.
• Features: All corners are radiused and ground smooth for safety and ease of cleaning. Extra return flange at front edge provides extra rigidity and comfort when lifting or lowering seat.
• Materials: All stainless steel, one piece construction. Seat: 16 ga. stainless steel type 304 with #4 brushed finish. Hinge: 16 ga. stainless steel type 304 bright annealed. Support ledge and clip: 16 ga. stainless steel type 304 with #4 brushed finish.
• Installation: Mount seat 17″-20″ from floor with stainless steel mounting screws provided (#10 x2″). Mount clip as close to the corner as possible. Shower seats can only support the loads intended with proper use of anchors and in wall backing. Insure wall struture meets local building codes and the architects specification. Shower seat will sustain a load of 300 lbs.

Frost Guarantee

Frost products are guaranteed from defects in workmanship or material for a period of one year from date of purchase. If any Frost product proves to be defective, it will be repaired or replaced without charge.

Frost Materials and Finishes

Type 304 No. 4 Finish:  Type 304 stainless steel is a standard all-purpose grade, recommended for food, dairy, chemical and medical industries. It is also widely used in architectural applications due to its excellent corrosion resistance. The No.4 finish is widely used in restaurant, architectural, medical and food processing products. All Frost stainless steel products are shipped with a removable protective plastic coating to insure a blemish free product when installed on site.

Bright Chrome Finish:  These products are fabricated from pre-chromed sheet steel, using the same processes as stainless steel, to provide an unblemished final product. Frost ships all pre-chromed products with a protective plastic film which is easily peeled off after installation.

Cold Rolled Steel:  Frost uses a variety of material thicknesses ranging from 16 to 26 gauge. The variety of material gauges provide the optimum balance between durability and economy. All cold rolled stock is oiled and rust free during fabrication, and degreased before final finishing.

Epoxy Polyester Hybrid Powder:  After a thorough degreasing, the assembled cold rolled products are coated with a formulated epoxy hybrid powder to a thickness of approximately 3 mls. An even coating is achieved by electrostatically charging the powder particles and spraying them onto the grounded product. All coated products are then oven cured at 400 degrees F. The result is a superior baked on finish with excellent mechanical/chemical characteristics and U.V. durability.

Detailed technical specifications are available upon request, or see our Downloads tab for information in pdf format.

Guarantee:  Frost products are guaranteed from defects in workmanship or material for a period of one year from the date of purchase. If any Frost product proves to be defective, it will be repaired or replaced without charge.