Miscellaneous Washroom Accessories

Frost Product Specifications

Programmable Aerosol Spray Dispenser

• Code 1107: Programmable dispenser for aerosol spray canister.
• Dry Formula Aerosol Spray Canister Refills: Code 1107-500VAN: Vanilla scent; Code 1107-500CIT: Citrus scent; Code 1107-500ORCH: Orchard scent; Code 1107-500MM: Mango scent.
• Site Location: Clean low maintenance design will suit most office and retail installations. Dry formula aerosol eliminates messy fall-out. V.O.C. Compliant. Eliminates smoke and other maloders (Net wt.: 6.6 oz, 187 g).
• Features: Built in LCD clock displays time for easy programming of starting and stopping spray intervals. Set spray start and spray stop to suit your office hours. Spray intervals can range from 1 minute to 60 minutes.
• Canister Capacity: 300 CC. Typical service life of the canister: 3,000 sprays (field example: 90 working days when used at 15 min. intervals, 9:00 a.m. to 5:00 p.m.). After 3,000 sprays, the dispenser stops automatically (can be reset). Ultra quiet spraying.
• Battery Details: Service life – 10,000 sprays or 1 year (2 “D” sized heavy duty alkaline batteries). Maintenance: green LED indicates functioning/spraying, red LED indicates low batteries should be replaced.
• Installation: Prior to mounting using self adhesive: clean surface, mark clearly with removable marker or masking tape the exact location and plumb line for unit. The tape does not allow for repositioning if unit is mounted crooked or askew. Allow tape to set ten hours prior to filling and loading batteries. Mounting holes and screws also provided.

Deodorizer Fixture

• Code 1100: Standard deodorizer fixture;  Code 1100-500: Deodorant block refills.
• Specifications: Chrome plated 20 gauge steel surface mounted fixture – holds all standard size deodorant blocks.

Automatic Toilet Flush Valve

• Code 1108: Touch free automatic toilet flush valve - brass construction with chrome finish.
• Specifications: Hose diameter 1 inch. Water pressure 0.5-7 kgs/cm3. Power - DC6V CR-P2 lithium battery. Battery life: About 4 years (or 200,000 flushes), CSA approved. Sensor detecting distance -  under 100 cm/water closet. Safety distance from sensor to the front wall - 100 cm/water closet. Auto flush mode - 2 seconds flush detected, less than 60 seconds continuous; 4.5 seconds flush detected, more than 60 seconds continuous. Outlet brass pipe diameter 1-1/2 inch.
• Features: Automatic by infrared sensor. Multi-functions flush by mechanical, manual push button and automatically by sensor detecting. More safety with lithium battery. Low power consumption, the battery can be used about 4 years or 200,000 flushes. Green/ operation indicating light. Red/ low power indicating light. Water filter is cleaned automatically. Water volume will not be reduced by a dirty filter. Waterproof.
• Fast installation - can be replaced with Sloan or Zurn manual flusher. The module type parts designed assure easier and faster maintenance.

Automatic Urinal Flush Valve

• Code 1109: Touch free automatic urinal flush valve - brass construction with chrome finish.
• Specifications: Hose diameter 1 inch. Water pressure 0.5-7 kgs/cm3. Power - DC6V CR-P2 Lithium Battery. Battery life: About 4 years (or 200,000 flushes), CSA approved. Sensor detecting distance - under 100 cm/water closet. Safety distance from sensor to the front wall - 100 cm/water closet. Auto flush mode - 2 seconds flush detected, less than 60 seconds continuous; 4.5 seconds flush detected, more than 60 seconds continuous. Outlet brass pipe diameter 1-1/2 inch.
• Features: Automatic by infrared sensor. Multi-functions flush by mechanical, manual push button and automatically by sensor detecting. More safety with lithium battery. Low power consumption, the battery can be used about 4 years or 200,000 flushes. Green/ operation indicating light. Red/ low power indicating light. Water filter is cleaned automatically. Water volume will not be reduced by a dirty filter. Waterproof.
• Fast installation – can be replaced with Sloan or Zurn manual flusher. The module type parts designed assure easier and faster maintenance.

Surface Mounted Vacuum Hose Rack

• Code 1110: Stainless steel vacuum hose rack.
• Specifications: One piece 20 gauge type 304 stainless steel hose rack. Designed to hold all standard vacuum hoses.

Wall Mounted Pail Hook

• Code 1111: Stainless steel empty pail hook.
• Specifications: All welded construction of 18 gauge type 304 stainless steel no. 4 finish. Protrudes 6” from wall. For use with empty pails only.

Broom/Mop Rack

• Code 1113: 3 holders, 26" long;  Code 1114: 4 holders, 36" long;  Code 1114-1: 5 holders, 36" long;  Code 1114-2: 6 holders, 36" long.
• Specifications: All welded construction of type 304 stainless steel with no. 4 brushed finish. Custom sizes available on request.

Janitorial Utility Shelf

• Code 1115: Stainless steel janitorial shelf.
• Specifications: All welded construction of 20 gauge type 304 stainless steel no. 4 brushed finish. Shelf features 3 mop or broom holders, 2 pail hooks and a 5/16" diameter chrome plated rod for drying cloths.

Surface Mounted Corner Guard

• Code 1117: Stainless steel wall corner guard.
• Specifications: 18 ga. stainless steel, no. 4 brushed finish.
• Dimensions: 4" x 4" x 40" (10 x 10 x 101.6 cm).
• Installation: Full length self adhesive backing (1/2" x 40") allows for quick installation.

Surface Mounted Kick Plate

• Code 1118: Stainless steel door kick plate, 10" x 34". Other sizes available on special order.
• Specifications: Stainless steel (20 ga.) type 304 # 4 finish. Radius corners. Stainless steel surface comes with PVC protective film, to be removed after installation.
• Shipping Weight: 3-1/2 lbs. (1.5 kg). Packaged individually.
• Installation: Use kick plate as template to mark mounting holes. Includes 8 stainless steel mounting screws, to ensure even mounting to door.

Wall Mounted Infant Change Table

• Code 1125: Standard flip down change table (horizontal design).
• Features: Frost Baby Changing Station with its 4” (10cm) depth can be installed in any location. Static load capacity: 250 pounds (115 kg.). Four-inch depth complies with A.D.A. and ANSI. A117.1 Handicapped accessibility. Oversized hinge and safety stop system. Safe and convenient sturdy child protection strap. Multilingual instructions, integral diaper bag hooks, easy opening and closing. Deep concave changing surface. Tamper proof hardware.
• Materials: Constructed of 100% high-density polyethylene. No metal components to wear. Fully sealed polyethylene components allows easy cleaning. Smooth exposed surfaces and concealed pneumatic gas spring mechanism. Built-in liner dispenser accepts standard multifold towels or sanitary liners.
• Overal Dimensions: 36" (91.4cm) wide x 22"(56.5cm) high x 4"(10.1cm) deep;  20-1/2"(52cm) deep when open.

Surface Mounted Towel Ring

• Code 1126SS: Stainless steel towel ring.

Surface Mounted Towel Shelf

• Code 1127S: Stainless steel towel shelf with towel rod for one guest;  Code 1127-62: for two guests;  Code 1127-63: for three guests;  Code 1127-64: for four guests.
• Dimensions: 24" length x 8" depth.
• Features: Heavy gauge steel with bright chrome finish. Concealed mounting screws included.

Surface Mounted Clothes Line

• Code 1128: Chrome plated locking and retractable clothes line. Extends 9 feet.

Wall Mounted Bottle Opener

• Code 1129SS: Stainless steel bottle opener.

Recessed Soap Holder

• Code 1132S: Stainless steel soap holder. Also available in heavy duty design.
• Wall box size: 5-1/4" x 5-1/4" x 1-1/2"

Heavy Duty Recessed Soap Holder

• Code 1132HD: 18 gauge stainless steel type 304 #4 finish.
• Face Dimensions: 7-1/4" wide x 5" high, with 5-1/2" opening.
• Features: 1-pc drawn steel, seamless unit; mortar lugs included.

Recessed Soap Holder and Grip Bar

• Code 1133S: Stainless steel soap holder with grip bar. Also available in heavy duty design.
• Wall box size: 5-1/4" x 5-1/4" x 1-1/2"

Heavy Duty Recessed Soap Holder with Grip Bar

• Code 1133HD: 18 gauge stainless steel type 304 #4 finish.
• Face Dimensions: 7-1/4" wide x 5" high, with 5-1/2" opening.
• Features: 1-pc drawn steel, seamless unit; mortar lugs included.

Recessed Toilet Paper Holder

• Code 1134S: Stainless steel toilet paper holder.
• Wall box size: 5-1/4" x 5-1/4" x 1-1/2"

Reserve Roll Toilet Tissue Holder

• Code 1134RR: Reserve roll toilet tissue holder, recessed.
• Specification: Recessed reserve roll toilet tissue holder. Toilet tissue holder is designed to be installed into a 4” (10.2) deep recess. The 4” deep well will hold an extra roll behind the exposed roll. Roller is white plastic.
• Material: All exposed surfaces are fabricated of satin finish stainless steel. Recessed portion of unit is mill finish stainless steel.
• Installation: Provide a wall opening 5-1/4” (13.5) x 5-1/4” (13.5) x 4” (10.2) deep. Secure to studs or solid backing through mounting holes. Mounting screws provided.

Recessed Double Toilet Tissue Holder

• Code 1134-DBL-SS: Recessed double toilet tissue dispenser, stainless steel.
• Specification: Double toilet roll holder body and flange fabricated of Type 304, 22 gauge stainless steel polished to a #4 satin finish. Comes with chrome plated plastic rollers.
• Material: Body and flange fabricated of type 304, 22 gauge stainless steel, polished to a #4 satin finish. Support posts are heavy duty chrome plated die cast components.
• Installation: Provide rough wall opening, 11-1/2” (29.2) W x 5-1/4" (13.4) H x 2" (5.1) D.

Surface Mounted Toilet Paper Holder

• Code 1135S: Stainless steel toilet paper holder.
• Material: Type 304 stainless steel no. 4 finish.
• Features: Concealed mounting. Will take jumbo rolls 5” (12.6 cm) in diameter.
• Installation: Screw concealed mounting system: The mounting bracket is attached to the wall with screws at the desired height. The unit is then hooked onto the bracket. When the set screw is tightened the product is firmly secured to the wall. The set screw applies pressure to an inclined surface on the bracket this provides a rattle free and integral mounting of the product. Mounting bracket and screws provided.

Surface Mounted Double Toilet Paper Holder

• Code 1135 DBL SS: Stainless steel double toilet paper holder.
• Material: Type 304 stainless steel no. 4 finish.
• Features: Concealed mounting. Will take jumbo rolls 5” (12.6 cm) in diameter.
• Installation: Screw concealed mounting system: The mounting bracket is attached to the wall with screws at the desired height. The unit is then hooked onto the bracket. When the set screw is tightened the product is firmly secured to the wall. The set screw applies pressure to an inclined surface on the bracket this provides a rattle free and integral mounting of the product. Mounting bracket and screws provided.

Surface Mounted Soap Dish

• Code 1136S: Stainless steel soap dish.
• Material: Type 304 stainless steel no. 4 finish.
• Features: Concealed mounting.
• Installation: Screw concealed mounting system: The mounting bracket is attached to the wall with screws at the desired height. The unit is then hooked onto the bracket. When the set screw is tightened the product is firmly secured to the wall. The set screw applies pressure to an inclined surface on the bracket this provides a rattle free and integral mounting of the product. Mounting bracket and screws provided.

Surface Mounted Toothbrush and Tumbler Holder

• Code 1137S: Stainless steel toothbrush and cup holder.
• Material: Type 304 stainless steel no. 4 finish.
• Features: Concealed mounting.
• Installation: Screw concealed mounting system: The mounting bracket is attached to the wall with screws at the desired height. The unit is then hooked onto the bracket. When the set screw is tightened the product is firmly secured to the wall. The set screw applies pressure to an inclined surface on the bracket this provides a rattle free and integral mounting of the product. Mounting bracket and screws provided.

Heavy Duty Robe Hook

• Code 1138S: Single/Stainless;  Code 1139S: Double/Stainless.
• Material: 16 ga. stainless steel type 304, no. 4 brushed finish.
• Features: Concealed mounting.
• Installation: Screw concealed mounting system: The mounting bracket is attached to the wall with screws at the desired height. The unit is then hooked onto the bracket. When the set screw is tightened the product is firmly secured to the wall. The set screw applies pressure to an inclined surface on the bracket this provides a rattle free and integral mounting of the product. Mounting bracket and screws provided.

Towel Bar

• Code 1140S: Stainless 18"; Code 1141S: Stainless 24"; Code 1142S: Stainless 30"; Code 1143S: Stainless 36".
• Material: Type 304 stainless steel no. 4 finish.
• Features: Concealed mounting.
• Installation: Screw concealed mounting system: The mounting bracket is attached to the wall with screws at the desired height. The unit is then hooked onto the bracket. When the set screw is tightened the product is firmly secured to the wall. The set screw applies pressure to an inclined surface on the bracket this provides a rattle free and integral mounting of the product. Mounting bracket and screws provided.

Shower Curtains and Accessories

• Code 1144: Chrome Shower rod 5' x 1" dia.
• Code 1144-500: Hold Back Hook and Chain
• Code 1144-501L: Stainless steel Curtain Hooks (pack of 12)
• Code 1144-502: Shower Curtain 48" x 78"
• Code 1144-503: Tub Curtain 70" x 72"
• Specifications: Shower curtains are made of 100% Polyvinyl Chloride (PVC), 8 gauge (.2mm) in thickness and have a suede embossed colour fast finish. The curtains are mildew proof and cold crack (-15 degrees C) treated. The shower ring grommets are reinforced with aluminum and concealed in an extra strength header. Shower curtain and plastic hooks come in standard white colour. Mounting flange is injection moulded plastic in plated finish. Mounting screws provided.

Stainless Steel Shower Rod

• Code 1145-S: Stainless Shower rod 5' x 1-1/4" dia.
• Code 1145-72SS: Stainless Shower rod 72" x 1-1/4" dia.
• Code 1145-36SS: Stainless Shower rod 36" x 1-1/4" dia.
• Materials: Shower rods are type 304 stainless steel with number 4 brushed finish. Flanges are drawn stainless steel type 304 number 4 brushed finish, 16 gauge.
• Installation: Stainless steel csk. Mounting screws provided.

Curved Stainless Steel Shower Rod

• Code 1145-CRV: Stainless Shower rod, brushed finish, for standard 60” tub.
• Site location: Provides elegant and practical use of space in a shower curtain enclosure.
• Features: Die cast brushed finish on all hardware components. 1” diameter stainless steel rod in brushed finish.
• Installation: Assemble curved shower rod. Hand tighten retaining screws. Do not tighten set screws at this time. Measuring Placement: Hold rod up to desired position, one person at each end, to check height and location. Be sure that rod is level. With a pencil lightly trace the top and bottom of the wall plate. Set rod down. Remove retaining screws. Separate the wall plates from the rod. Leave swivel connectors on the rod. Place wall plates back on the wall at pencil marks. Mark screw holes at 12 and 6 o’clock positions. Set wall plate aside. Read anchor instructions carefully. Drill screw holes as marked. Install 4 anchors unless a hole is on a stud. Mount wall plates, Screw in to anchors. Place rod, with swivel connectors attached and set screw holes facing up into wall plates. Screw in retaining screws. Tighten. Adjust rod. Be sure that each end of rod is into the connector far enough to engage set screws and make solid contact. Tighten set screws with allen wrench.
• Helpful Hints: Put a drop of thread fastener such as silicone on each of the set screws and retaining screws to prevent them from working loose. If mounting above the tile line leave enough room to use screw driver on the bottom retaining screws.

Coat Hook with Bumper

• Code 1146B: Surface mounted single hook with bumper, stainless steel.
• Specifications: The code 1146B has a vinyl covered protective end to help prevent scratching when mounted to doors or in the path of door swings.
• Materials: Hooks are fabricated from 12 gauge (.1") thick solid stainless steel. All stainless shall be type 304 with no. 4 brushed finish. Ends are radiused with all edges deburred.
• Shipping Weight: 1/4 lb. (100 grams).
• Installation: Single hook mounting hole centres 2.5" c-c (63.5 mm). Pan socket head SS mounting screws provided. For unrestricted access, top of coat hook to floor does not exceed 48" (120).

Stainless Steel Coat Hook

• Code 1146: Stainless steel, single hook;  Code 1147: Stainless steel, three hook strip.
• Specifications: Hooks are fabricated from 12 gauge (.1") thick solid stainless steel. Hook ends are 1" (2.54) radius with all edges deburred. Hook strip fabricated from 20 ga. stainless steel.

Safety Coat Hook

• Code 1150: One white hook with stainless steel base;  Code 1150BK: One black hook with stainless steel base;  Code 1150-3: Three white hooks on stainless steel strip.
• Specifications: All stainless steel type 304 no. 4 finish. Hook is epoxy coated 18 ga. stainless steel, providing a smooth burr free edge. Spring loaded coat hook will only support weight of coat or jacket, heavier objects will slip off. Coat hook will not support loads in excess of 11 kilograms (25 lbs.), patent pending.
• Installation: Secure to any panel with ss mounting screws provided. Screws are counter sunk ss with Phillips style finished head. Alternative colours available on special order ( 5-6 week lead times may apply).
• Note: Colour suffixes – B: blue, BK: black, R: red. (Example: Code 1150R denotes red hook on stainless base.)

Hand Sanitizer Stand

• Code 1600: Sanitizing dispenser stand, silver epoxy finish.
• Code 1600-500: Additional mounting plate to produce a double dispenser unit.
• Code 1600-501: Waste container and mounting bracket.
• Specifications: Base and upright tube are one piece all welded construction (18 ga. cold rolled steel) with a silver powder coated finish. Mounting plate is 12 ga. crs in a white epoxy coated finish.
  A 7" x 7" (18 x18cm) area on the mounting plate can be used for promotional or instruction signage. The optional waste container
  on the Code 1600-501 is made of a rotationally moulded polyethylene and is leak proof. Mounting screws included: Two (2) 10-24 unc machine screws (Phillips head) to secure dispenser to mounting plate One (1) 5/16-18 unc machine screw (Phillips head) to secure mounting plate to tube support.

Recessed Facial Tissue Dispenser

• Code 175: Recessed mounting, polished chrome finish.
• Site location: Ideal for areas where the dispensing of standard or quality facial tissues is required. Faceplate manufactured from 20 ga. steel.
• Features: Die formed safety edge on diamond shaped opening allows easy removal of facial tissue. Recessed body is die formed from 20 ga. corrosion resistant galvanized steel. Slide catches secure faceplate to recessed body.
• Shipping Weight: 2 lbs. (.9kg)
• Installation: Provide wall opening 11-1/4" wide (13.4cm) x 5-1/4" high (13.4cm) x 2-1/4" deep (5.7cm). Secure recessed body to wall using mounting screws provided. Individually packaged.

Paper Cup Dispenser

• Code 185: White epoxy powder finish;  Code 187: Stainless steel type 304, no. 4 brushed finish.
• Materials: Body and back formed from 22 ga. steel. Body hinged on hardened steel rivets pivoting forward for easy loading and maintenance. Level gauge slot on front of unit. Friction catch to secure unit in closed position. Designed to dispense standard 4 oz. rolled edge regular and cone cups.
• Shipping Weight: 2 lbs. (.9 kg)
• Installation: Position bottom of fixture 48" (122cm) from floor. Secure to wall using screws and mounting holes provided.

Toilet Seat Cover Dispenser

• Code 199-S: Surface mounted, Stainless steel;  Code 199-W: Surface mounted, white finish;  Code 199-R: Recessed, stainless steel.
• Code 199- 2500: Half fold seat covers, green seal. Packed 2,500 / case (10 sleeves of 250);  Code 199- 5000: Half fold seat covers, green seal. Packed 5,000 / case (20 sleeves of 250).
• Features CRS: All welded construction of 22 gauge crs. Door secured with keyed tumbler lock.
• Features SS: All stainless steel construction of 22 gauge type 304 no. 4 brushed finish. Full length stainless steel piano hinge on door. One piece frame on recessed unit with rigid 1/4" return on sides.
• Shipping Weight: 6 lbs. (2.8 kg)
• Installation: For unrestricted access, top of unit to floor does not exceed 48" (120). For recessed units provide rough opening: 16" W (40.6) x 11-1/8" H(28.2) x 1-5/8" D(4.1).

Frost Guarantee

Frost products are guaranteed from defects in workmanship or material for a period of one year from date of purchase. If any Frost product proves to be defective, it will be repaired or replaced without charge.