Exit Devices

33A/35A Rim Device

 

 

INTRODUCTION

The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible

manufacturers. Exit devices are a critical part of a door opening or access system and will provide safe and

reliable service when properly applied and maintained. It is the policy of Von Duprin to design and manufacture

exit devices to a high standard of quality and reliability in accordance with accepted U.S. domestic and

international standards. All 33A and 35A series exit devices are UL listed for Panic Exit or Fire Exit Hardware,

and are tested in accordance to ANSI A156.3, 1994, Grade I.

It is intended that the information included in this publication, when properly used, will provide clear and

reliable guidelines to the proper general selection and application. However, the scope of the information is

necessarily limited.

Unusual operating conditions and environments and other external influences can affect the proper application

of the products represented. Modifications of these products will also affect UL listings. It is recommended that

whenever an unusual application condition exists, or when any modification of a product is considered, that our

engineers review the application.

Application engineering services are available to help ensure proper selection or to review any areas where

users of Von Duprin products may have questions.

 

Von Duprin pushpad exit devices are available in two external surface styles, designated 33A series and 35A series.

The two styles are mechanically and dimensionally identical and provide a wide selection of appearance options.

 

33A/35A Rim Device

33A/35A Rim Device Functions

Finish

 

 

 

 

Back to Exit Devices

---

75 Plymouth Street

Winnipeg, Manitoba R2X 2V5

Phone: 204-694-4771

Toll Free For Manitoba and NW Ontario: 1-888-871-Door (3667)

Fax: 204-694-7130

Email: info@pennerdoors.com