|
|
- All models are UL listed and
incorporate integral battery charging capability which
keeps the sealed lead acid gel/cell at full charge for
instantaneous stand-by power in case of line voltage
failure. All models in the series are Class 2 rated by
UL which means that output wiring need not be run in
conduit. The BPS-12-1 and BPS-24-1 are one amp units
that incorporate a fused AC input and a regulated DC
output. A 2.5 Amp current limiting automatic breaker
protects the stand-by batteries from driving into a
short circuit. Plus, in the event of a DC short, the
supply’s regulator will go into thermal cut-off,
switching off the output. The power supply enclosure
is sized large enough to include at least two optional
four amp-hour batteries and the unit can charge up to
a 20 AH pack (batteries mounted externally).
BPS Series - Class 2 With Or Without
Batteries
-
|
