Electronic Hardware

Battery powered flush or surface mount door alarms

EA-500

The Detex EA-500 Series Exit Alarm's surface-mount, slim line design blends with architectural decor and is easy to install using ordinary tools. This low-cost, self-contained door alarm employs a 95-decibel, directional piezo horn to warn of unauthorized use of a door. Specifications Model No./Description: EA-500 Primary Use: Battery Powered Surface Mount Door Alarm Physical Characteristics: 3-3/16" wide x 2-7/8" deep x 8-5/16" long Electrical Characteristics: Standard 9V long-life alkaline battery Typical Specification: (Qty) x EA-500 x ECL-445K

 Features

• Case and internal mounted piezo horn resist tampering

• Threaded lock-on cover protects mounting screws, electrical system and internal sensor

• Alarm can only be silenced by use of the proper control key or remote bypass switch/outside key control feature

• Piezo horn with directional characteristics blasts over 95 decibels of sound if door is used without authorization

• Low battery alert detector causes alarm to 'chirp' and LED to blink (in a manner similar to smoke alarms) whenever the battery needs replacing

• Reverse battery protection safeguards circuitry if battery is inserted incorrectly

• Re-arming within a few seconds after authorized use is automatic and does not depend on the user remembering to do it

• Alarm is triggered by reliable magnetic switching

• Adjustable time delay (5-30 seconds) allows sufficient time to exit

• 90º detent prevents the removal of the control key when the unit is in the disarmed position

• Optional Feature - State-of-the-art electronic closed loop circuit operation - alarm will sound any time the wires to the external sensor are cut

 

Back to Electronic Hardware

---

75 Plymouth Street

Winnipeg, Manitoba R2X 2V5

Phone: 204-694-4771

Toll Free For Manitoba and NW Ontario: 1-888-871-Door (3667)

Fax: 204-694-7130

Email: info@pennerdoors.com