|
- UNLATCH
APPLICATIONS
- UNLATCH is for any application where an electric
strike would be used for a cylindrical/tubular
lockset. A single UNLATCH model will operate any North
American cylindrical type spring latch and dead latch.
There is no need to determine the specific brand of
latching hardware, the UNLATCH accepts all of them.
Similarly, the same UnLatch model can be installed on
all door types: steel, aluminum or wood. Problems of
ending up with the wrong electric strike model for the
door or latch type are eliminated.
- CURRENT DRAW and
VOLTAGE
- 12VDC-40mA continuous, minimum 300mA when
operating
- 24VDC-40mA continuous, minimum 200mA when
operating
- Higher capacity supply (1-3 Amps) is recommended
for startup
- inrush to achieve best operation under pre-load.
- DIMENSIONS
- 3 3/8” x 1 3/8” x 1 7/16” [86mm x 35mm x 36mm]
- PRODUCT
FEATURES
- • Fits standard ANSI 4-7/8” strike cutout
- • No cutting on the jamb required
- • Motorized, no solenoids
- • Fully concealed installation
- • Maintains dead-latch function at all times
- • Releases under pre-load
- • Latch status sensor is standard
- • UL Listed
|
