-
|
Available Sizes
|
|
Inches
|
MM
|
Gauge
|
|
4 x 4*
|
101.6 x 101.6
|
.130
|
|
4 1/2 x 4
|
114.3 x 101.6
|
.134
|
|
4 1/2 x 4
1/2
|
114.3 x 114.3
|
.134
|
*4 x 4 not
available in stainless.
|
- Steel base material.
Recommended for standard weight, medium frequency
doors in place of a door closer in apartments, hotels,
motels, dormitories, office buildings, etc. UL Listed
Grade 1, cycling over a million cycles.
-
- 1502
- Steel base material polished
and plated or furnished in prime or powder
coat.
- 1552
- Stainless steel material
polished and passivated.
- Availble
Options
- • RC (round corner - 1/4"
radius furnished unless specified otherwise
- • HT (hospital tip - on one
side only*)
- • MM (magnetic
monitoring)
- • “S” (sheradizing, our
additional rust resistant base under prime coat on
steel base)
- • Reverse Spring Option
1502-R* (Maintains the door in the open
position)
- • TRS (tamper resistant
option) for additional security. A tamper resistant
screw is screwed into the tension ratchet after the
proper tension has been set.
-
* Voids the UL®
listing
|
|
- ANSI Cross
Reference:
- K81071
Steel
- K81071F
Steel
- K51071 Stainless
Steel
- K51071F Stainless
Steel
-
- Caution: Use of gasket for smoke or sound
protection, wind condition of unbalanced air pressure
may prevent door from latching. Additional closing
power would be required. NFPA requires a minimum of
two (2) spring hinges on labeled doors.
|
Template
